FAQUse the search field below to find information on the term you specify. We maintain this data base regularly to keep its information completely current. If you have any suggestions or feedback for us, we'd be happy to put them in our data base so other customers can benefit as well. E-mail:support@transtec.co.uk support@ttec.nl support@ttec.be |
Please enter a problem-related keyword or a valid product code
Please use the Link to see the solutions
The most popular 10 matches
| Prodname | Question | Solution |
|---|---|---|
| T6100F12R1-A | I cannot recognize any of the partitions of my T6100 FibreChannel-RAID on the FC-card of my SUN-machine athought the RAID seems to be properly configured? | Please boot the host with 'boot -r' and check the following RAID-menue-options for the correct settings: -> [ View & Edit Channels ] -> channel 0 -> press return -> select DataRAID ... |
| ADA-2010S,ADA-2015S | How do I install SLES 9 on Adaptec Zero Channel RAID Controllers ADA-2010S and ADA-2015S? | - Startup CD1 - Choose Manual installation - Select Kernel modules - Select Install SCSI/RAID modules - Select i2o_block Hit OK several times (there will be loaded three drive... |
| X1002XSR27-F | why is the mouse not available in my xwindows? | first try to initialize the mouse with Changing to a console window and back (Ctrl+Alt+F4 and Alt+F7). If the mouse not available anymore, try this in xwindows: 1. Press Alt+F2 2. Type yast2 ... |
| D1567-C | Why can't I install WindowsN on the D1567-C ? Both NT4 Workstation and Server fail on the inital setup after booting from the CD - after the section where it loads the initial drivers, last driver loading message is "CDROM file system" then crashes and restarts. I have disabled APM/APCI but no difference.. | If you could set the following in the mainboard-BIOS, please: under Advanced / Advanced System Configuration / Limit CPUID functions --> ENABLED This setting is required, because Wi... |
| ST336607LC | When I exchange a Seagate disk model ST336607LC for the same one in a RAID-array, the disk is recognized with 1x block smaller and will not be accepted by the controller. How can this be? | It seems that Seagate has slightly changed the design of the disk: Old: A-01-0322-6 9V4006-002 FW v0003 New: A-01-0453-7 9V4006-003 FW v0007 Plea... |
| D1527-A,ESC7506-4 | When entering the menue of the ESC7506-4 RAID-controller I can only see empty fields and strange DOS characters, why? | This seems to happen with the Fujitsu-Siemens mainboard D1527-A in connection with the ESC7506-4 RAID-controller: The problem is down to the transtec-logo at start-up, preventing the RAID-menue fr... |
| Why is my additional Intel Gigabit NIC shown as unknown device although my e1000.o Kernelmodule is already loaded and working fine with my onboard NIC? | Because intel changed the chips on the Gigabit Network Cards the implemented kernelmodule is not assisting the new chip. Download the latest kernelmodule from intel homepage. After that you have t... | |
| X5DP8-G2,CSE-742S-50 | Q: I just purchased the SC742S chassis with an SCA Backplane (CSE-SCA0-09). I'm having trouble installing GEM359 driver. When installing the driver I always get the message shown below. Any suggestion? | A: Yes, you may need to open the GEM359 INF file and edit it as below: [GEM_device] %Description% =GemNull.Install,SCSI\ EnclosureSUPER__GEM359__________ to: [GEM_device] %... |
| Why do I get the following error message by booting Linux if I connect an external RAID Box to the Adaptec Ultra 320 Controller: scsi0:A:0:0: DV failed to configure device. Please file a bug report against this *** | This is not a problem with Linux. The SCSI Controllers Domain Validation function is not able to configure the connected RAID device. disable the DOMAIN VALIDATION function in the Adapte... | |
| X2600XIS75-A,X5DAE | Why doesn't my system boot if I don't have a keyboard attached to it? I want to boot the system from remote... | 3x possible solutions: 1.) Have a look at the "halt on error" -setting in the mainboard-BIOS If you disable or reconfigure this setting, then the server should come up okay,... |
